Filter
Top Products
1276 CHAPTER 83: IPV6 IS-IS CONFIGURATION COMMANDS
Description Use the ipv6 import-route isisv6 level-2 into level-1 to enable IPv6 IS-IS
route leaking from Level-2 to Level-1.
Use the
undo ipv6 import-route isisv6 level-2 into level-1 command to
disable the leaking.
The leaking is disabled by default.
The route leaking feature enables a Level-1-2 router to advertise routes destined to
the Level-2 area and other Level-1 areas to the Level-1 and Level-1-2 routers in the
local area.
Examples # Enable IPv6 IS-IS route leaking from Level-2 to Level-1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 import-route isisv6 level-2 into level-1
ipv6 maximum load-balancing
Syntax ipv6 maximum load-balancing number
undo ipv6 maximum load-balancing
View IS-IS view
Parameters number: Maximum number of equivalent load-balanced routes.
Description Use the
ipv6 maximum load-balancing command to configure the maximum
number of equivalent load-balanced routes. Use the undo ipv6 maximum
load-balancing command to restore the default.
n
Configure the maximum number of equivalent load-balanced routes according to
the memory capacity.
Examples # Configure the maximum number of equivalent load-balanced routing as 2.
<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] ipv6 maximum load-balancing 2
ipv6 preference
Syntax ipv6 preference { route-policy route-policy-name | preference } *
undo ipv6 preference
View IS-IS view
Parameters preference: Preference for IPv6 IS-IS, ranging from 1 to 255.