Filter
Top Products
535
Use the undo pppoe-server log-information off command to enable the
function.
By default, the PPPoE server displays the PPP log information.
Displaying too much log information can affect the performance of the device and
can be a nuisance to user during configuration. You can use this command to
disable the PPPoE server to display the PPP log information.
Example # Disable the PPPoE server to display PPP log information.
<Sysname> system-view
[Sysname] pppoe-server log-information off
pppoe-server max-sessions local-mac
Syntax pppoe-server max-sessions local-mac number
undo pppoe-server max-sessions local-mac
View System view
Parameter number: Maximum number of sessions that can be established at a local MAC
address, in the range 1 to 4069.
Description Use the
pppoe-server max-sessions local-mac command to set the maximum
number of PPPoE sessions that can be established at a local MAC address.
Use the
undo pppoe-server max-sessions local-mac command to restore the
default configuration.
By default, the value of number is 100.
Example # Set the maximum number of PPPoE sessions that can be established at a local
MAC address to 50.
<Sysname> system-view
[Sysname] pppoe-server max-sessions local-mac 50
pppoe-server max-sessions remote-mac
Syntax pppoe-server max-sessions remote-mac number
undo pppoe-server max-sessions remote-mac
View System view
Parameter number: Maximum number of PPPoE sessions that can be established by the
system with regard to a peer MAC address, in the range 1 to 4096.