Filter
Top Products
1524 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS
display mpls ldp remote-peer
Syntax display mpls ldp remote-peer [ remote-name remote-peer-name ] [ | { begin |
exclude | include } regular-expression ]
View Any view
Parameter remote-peer-name: Name of the remote peer, a case-insensitive string of 1 to 32
characters.
|: Filters the output information.
begin: Begins with the specified string.
include: Includes the specified string.
exclude: Excludes the specified string.
regular-expression: Regular expression, a string of 1 to 80 characters. No blank
space is acceptable.
Description Use the
display mpls ldp remote-peer command to display information about
LDP remote peers.
Related command: mpls ldp (system view), mpls ldp (interface view), remote-ip.
Example # Display information about remote peer BJI.
LDP Remote Entity Information
--------------------------------------------------------------------------
Remote Peer Name : BJI
Remote Peer IP : 3.3.3.3 LDP ID : 1.1.1.1:0
Transport Address : 1.1.1.1
Configured Keepalive Timer : 45 Sec
Configured Hello Timer : 45 Sec
Table 375 Description on the fields of the display mpls ldp peer verbose command
Field Description
Peer LDP ID LDP identifier of the peer
Peer Max PDU Length Maximum PDU length of the peer
Peer Keepalive Timer Keepalive timer of the peer
Peer Loop Detection Whether loop detection is enabled on the peer
Peer Path Vector Limit Limit of the path vector hop count configured on the peer
Peer FT Flag Whether GR FT is enabled on the peer
Reconnect Timer GR reconnection timer
Recovery Timer GR recovery timer
Peer Transport Address Transport address of the peer
Peer Label Advertisement Mode Label advertisement mode of the peer
Peer Discovery Source Discovery source of the peer