Filter
Top Products
426 CHAPTER 26: LAPB AND X.25 CONFIGURATION COMMANDS
Parameter hunt-group-name: Hunt group name, a string of 1 to 30 characters.
Description Use the
display x25 hunt-group-info command to view the status information
of X.25 hunt group.
You can use this command to learn the hunt group of the Router and the
information about the interfaces and XOT channel inside the hunt group.
Related command: x25 hunt-group.
Example # Display the status information of X.25 hunt group hg1.
<Sysname> display x25 hunt-group-info hg1
HG_ID : hg1 HG_Type: round-robin
member state vc-used in-pkts out-pkts
Serial1/0 Last used 2 51 20
Serial2/0 Next 1 21 15
1.1.1.1 Normal 1 24 3
display x25 map
Syntax display x25 map
View Any view
Parameter None
Description Use the
display x25 map command to display the X.25 address mapping table.
The X.25 address mapping can be configured in two methods: using the x25 map
command or using the x25 pvc command. The display x25 map command can
display all the address mappings.
Table 57 Description on the fields of the display x25 hunt-group-info command
Field Description
HG_ID : hg1 The hunt group name is hg1
HG_Type: round-robin Hunt group call channel selection policy (including round-robin
and vc-number)
member Interfaces or XOT channel contained in hunt group
state The state of the current interface or XOT channel, including:
Last used: latest used
Next: next selected
Normal: normal state
Unavail: Unavailable state
vc-used Number of calls on the interface or XOT channel (including call
success and call failure)
in-pkts Input flow on the interface or XOT channel in packets
out-pkts Output flow on the interface or XOT channel in packets