Filter
Top Products
1488 CHAPTER 93: IPV6 PIM CONFIGURATION COMMANDS
Related command: hello-option neighbor-tracking (IPv6 PIM view).
Example # Disable join suppression on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 hello-option neighbor-tracking
pim ipv6 hello-option override-interval
Syntax pim ipv6 hello-option override-interval interval
undo pim ipv6 hello-option override-interval
View Interface view
Parameter interval: Prune override interval in milliseconds, with an effective range of 1 to
65,535.
Description Use the
pim ipv6 hello-option override-interval command to configure the
prune override interval on the current interface.
Use the
undo pim ipv6 hello-option override-interval command to restore
the default setting.
By default, the prune override interval is 2,500 milliseconds.
Related command: pim ipv6 hello-option lan-delay, hello-option lan-delay (IPv6 PIM view),
and hello-option override-interval (IPv6 PIM view).
Example # Set the prune override interval to 2,000 milliseconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim ipv6 hello-option override-interval 2000
pim ipv6 holdtime assert
Syntax pim ipv6 holdtime assert interval
undo pim ipv6 holdtime assert
View Interface view
Parameter interval: Assert timeout time in seconds, with an effective range of 7 to
2,147,483,647.
Description Use the
pim ipv6 holdtime assert command to configure the assert timeout
time on the current interface.