Filter
Top Products
1732 CHAPTER 100: VAM CLIENT CONFIGURATION COMMANDS
Parameter address-map: Refers to the mapping information between public and private
network addresses of the VAM client.
fsm: Refers to the status information of the VAM client.
client-name: VAM client name, a case-insensitive string of 1 to 31 characters.
Description Use the
display vam client command to display registration information of the
VAM client.
On a Spoke, the command displays the address mapping information of the other
Spokes and the Hubs that is received from the VAM server. On a Hub, the
command displays the address mapping information of the other Hubs that is
received from the VAM server.
Note that:
■ If client-name is specified, the registration information of a specific VAM client
is displayed.
■ If client-name is not specified, the registration information of all VAM clients is
displayed.
■ As for the arguments not specified, or the information not obtained
dynamically, the corresponding information will not be displayed.
Example # Display the status information of VAM client abc.
<Sysname> display vam client fsm abc
Client name: hub
VPN name: 1
Interface: Tunnel0
Resend interval(seconds): 5
Client type: Hub
Username: user1
Primary server: 28.1.1.23
Current state: ONLINE
Holding time: 9h 20m 30s
Encryption-algorithm: AES-128
Authentication-algorithm: SHA1
Secondary server: 28.1.1.33
Current state: OFFLINE
Holding time: 1h 24m 1s
Encryption-algorithm: AES-128
Authentication-algorithm: SHA1
Table 464 Description on the fields of the display vam client fsm command
Field Description
Client name Name of the VAM client
VPN name Name of the VPN domain where the VAM client resides
Interface DVPN tunnel interface of the VAM client
Resend interval(seconds) Protocol message retransmission interval of the VAM client
Client type VAM client type, Hub or Spoke
Username Username of the VAM client