Filter
Top Products
1588 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
ip-address: IP address of an interface.
network-lsa: Displays traffic engineering database (TEDB) information in network
LSAs.
node: Displays the TEDB information on nodes. If no node is specified, the TEDB
information on all nodes is displayed.
mpls-lsr-id: Specifies a node by its MPLS LSR ID.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Description Use the
display mpls te cspf tedb command to display information about
CSPF-based TEDB by specified criteria.
Example # Display TEDB information in network LSAs.
<Sysname> display mpls te cspf tedb network-lsa
Maximum Network LSA Supported: 500
Current Total Network LSA Number: 7
Id DR MPLS LSR-Id DR-Address IGP Process-Id Area Neighbor
1 8.1.1.2 3.0.0.2 OSPF 100 0 1.1.1.1
2.1.1.1
8.1.1.2
2 2.1.1.1 3.0.0.3 OSPF 100 0 2.1.1.1
3.1.1.1
2.1.1.2
3 3.1.1.2 3.0.0.4 OSPF 100 0 3.1.1.1
4.1.1.1
3.1.1.2
4 4.1.1.2 3.0.0.5 OSPF 100 0 4.1.1.1
5.1.1.1
4.1.1.2
5 5.1.1.2 3.0.0.6 OSPF 100 0 5.1.1.1
6.1.1.1
5.1.1.2
6 6.1.1.2 3.0.0.9 OSPF 100 0 6.1.1.1
7.1.1.1
6.1.1.2
7 7.1.1.1 12.0.0.7 OSPF 100 0 3.1.1.1
7.1.1.1
7.1.1.2
Table 406 Description on the fields of the display mpls te cspf tedb command
Field Description
ID Number
DR MPLS LSR-Id MPLS LSR ID of the designated router (DR)
DR-Address Interface address of the DR
IGP Interior gateway protocol: OSPF or IS-IS