Filter
Top Products
536 CHAPTER 33: PPPOE SERVER CONFIGURATION COMMANDS
Description Use the pppoe-server max-sessions remote-mac command to set the
maximum number of PPPoE sessions that can be established by the system with
regard to a peer MAC address.
Use the
undo pppoe-server max-sessions remote-mac command to restore
the default configuration.
By default, the value of number is 100.
Example # Set the maximum number of PPPoE sessions that can be established by the
system with regard to a peer MAC address to 50.
<Sysname> system-view
[Sysname] pppoe-server max-sessions remote-mac 50
pppoe-server max-sessions total
Syntax pppoe-server max-sessions total number
undo pppoe-server max-sessions total
View System view
Parameter number: Maximum number of PPPoE sessions that the system can establish, which
ranges from 1 to 65535.
Description Use the
pppoe-server max-sessions total command to set the maximum
number of PPPoE sessions that the system can establish.
Use the
undo pppoe-server max-sessions total command to restore the
default configuration.
By default, the value of number is 4096.
Example # Set the maximum number of PPPoE sessions established by the system to 3000.
<Sysname> system-view
[Sysname] pppoe-server max-sessions total 3000
reset pppoe-server
Syntax reset pppoe-server { all | interface interface-type interface-number | virtual-template
number }
View User view
Parameter all: Terminates all the PPPoE sessions.
interface interface-type interface-number: Specifies an interface by its type and
number.