Filter
Top Products
940 CHAPTER 71: IP ROUTING TABLE COMMANDS
Direct Routing table Status:<Inactive>
Summary Count : 0
# Display summary information about static routes.
<Sysname> display ip routing-table protocol static
Public Routing Table : Static
Summary Count : 2
Static Routing table Status:<Active>
Summary Count : 0
Static Routing table Status:<Inactive>
Summary Count : 2
Destination/Mask Proto Pre Cost NextHop Interface
1.2.3.0/24 Static 60 0 1.2.4.5 Vlan10
3.0.0.0/8 Static 60 0 2.2.2.2 Eth1/0
For detailed description of the above output, see Table 204.
display ip routing-table statistics
Syntax display ip routing-table [ vpn-instance vpn-instance-name ] statistics
View Any view
Parameters vpn-instance vpn-instance-name: Displays routing table information for a VPN
instance. The VPN instance name is a string of 1 to 31 characters.
Description Use the
display ip routing-table statistics command to display statistics
about the public network routing table or a VPN routing table.
Examples # Display statistics about the routes in the routing table.
<Sysname> display ip routing-table statistics
Proto route active added deleted freed
DIRECT 24 4 25 1 0
STATIC 4 1 4 0 0
RIP 0 0 0 0 0
OSPF0000 0
IS-IS 0 0 0 0 0
BGP 0 0 0 0 0
Total 28 5 29 1 0
Table 205 Description on the fields of the display ip routing-table statistics command
Field Description
Proto Origin of the routes. Possible values include O_ASE for OSPF_ASE routes,
O_NSSA for OSPF NSSA, and AGGRE for aggregated routes.
route Number of routes from the origin
active Number of active routes from the origin
added Number of routes added into the routing table since the router starts up
or the last routing table reset operation