Filter
Top Products
1599
display ospf mpls-te
Syntax display ospf [ process-id ] mpls-te [ area area-id ] [ self-originated ]
View Any view
Parameter process-id: OSPF process ID, in the range 1 to 65535. If a process is specified, only
the TE LSAs of this process are displayed; if no process is specified, the TE LSAs of
all processes are displayed.
area area-id: Displays the TE LSAs of a specified OSPF area. The area-id argument
takes an integer in the range 0 to 4294967295 or the form of IPv4 address.
self-originated: Displays self originated TE LSAs.
Description Use the
display ospf mpls-te command to display TE LSAs in the link state
database (LSDB).
Example # Display all TE LSAs in the LSDB.
<Sysname> display ospf mpls-te
OSPF Process 100 with Router ID 10.0.0.1
Area ID:
Traffic Engineering LSA’s of the database
------------------------------------------------
BackUpBW Flag Backup bandwidth flag
BackUpBW Type Backup bandwidth type
BackUpBW Backup bandwidth
Route Pinning Route pinning function
Retry Limit Maximum number of setup retries
Retry Interval Retry interval
Reopt State of the reoptimization function
Reopt Freq Reoptimization interval
Back Up Type Backup path type
Back Up LSPID Backup LSP ID
Auto BW State of the automatic bandwidth adjustment function
Auto BW Freq Automatic bandwidth adjustment interval
Min BW Lower limit for automatic bandwidth adjustment
Max BW Upper limit for automatic bandwidth adjustment
Current Collected BW Bandwidth information currently collected
Interfaces Protected FRR protected interfaces
VPN Bind Type Type of the binding, VPN or ACL
VPN Bind Value Value of the binding, the VPN instance name or ACL
number
Car Policy Whether CAR policy is enabled
Table 417 Description on the fields of display mpls te tunnel-interface command
Field Description