Filter
Top Products
423
0 broadcasts, 0 multicasts
3 errors, 0 runts, 0 giants
0 CRC, 3 align errors, 0 overruns
0 dribbles, 0 aborts, 0 no buffers
0 frame errors
Output:210 packets, 4720 bytes
0 errors, 0 underruns, 0 collisions
0 deferred
DCD=UP DTR=UP DSR=UP RTS=UP CTS=UP
Table 55 Description on the fields of the display interface command
Field Description
Link-protocol is X.25 DCE Ietf Current encapsulation protocol of this interface is X.25
protocol that works in DCE mode, and the data packet
encapsulation format is IETF.
address is X.121 address of this X.25 interface; this field will be empty
if there is no address.
state Current status of this X.25 interface.
modulo Data packets and traffic control packets sent by this X.25
interface are numbered in modulo 8 mode.
window sizes input:2 output:2,
packet sizes input:128
output:128
Flow control parameters of this X.25 interface, including
receiving window size, sending window size, maximum
received packet size (in bytes), and maximum sent packet
size (in bytes).
Channels: Incoming-only 0-0,
Two-way 1-1024, Outgoing-only
0-0
Channel range division of this X.25 interface, sequentially
as incoming-only channel section, two-way channel section,
outgoing-only channel section; if both demarcating values
of an section are 0, this section is disabled.
Timers: T20 180, T21 200, T22
180, T23 180, T28 300,
Idle_Timer 0 <seconds>
Delay values of various timers of this X.25 interface, in
seconds
New Configuration: New configuration of this X.25 interface taking effect after
next restart; if this configuration is wrong, the default value
will be restored
Restarts 0 (Restart Collisions 0) Statistics of this X.25 interface, including times of restart
(including restart collision)
Refused Incoming Call Statistics information of this X.25 interface: times of call
refusals
Failing Outgoing Call Statistics information of this X.25 interface: Number of
failed outgoing calls.
input/output: RESTART 1/1 ...
REJ 0/0
Statistics information of this X.25 interface: quantities of
received and sent packets, format: received quantity/sent
quantity.
Invalid Pr Error statistics information of this X.25 interface: total of
received data packets and traffic control packets carrying
erroneous acknowledgement numbers.
Invalid Ps Error statistics information of this X.25 interface: total of
received data packets carrying erroneous sequence
numbers.
Unknown Error statistics information of this X.25 interface: total of
received irresolvable packets.
Link-protocol is LAPB Current encapsulation protocol of this interface is LAPB
protocol.
LAPB DCE: LAPB of this interface works in DCE mode.
module 8 Information frame and monitoring frame sent by this
interface LAPB are numbered in the modulo 8 view.