Filter
Top Products
2105
View System view
Parameter source-acl6-number: Number of an existing IPv6 ACL, which must be in the
following ranges (the available ACL number ranges varies by device):
■ 2000 to 2999 for basic IPv6 ACLs
■ 3000 to 3999 for advanced IPv6 ACLs
source-acl6-name: Name of an existing IPv6 ACL, a case insensitive string of 1 to
32 characters. It must start with an English letter and cannot be the English word
of all to avoid confusion.
dest-acl6-number: Number of a non-existent IPv6 ACL, which must be in the
following ranges (the available ACL number ranges varies by device):
■ 2000 to 2999 for basic IPv6 ACLs
■ 3000 to 3999 for advanced IPv6 ACLs
dest-acl6-name: Name for the new IPv6 ACL, a case insensitive string of 1 to 32
characters. It must start with an English letter and cannot be the English word of
all to avoid confusion. The system will automatically assign the new ACL a
sequence number which is the smallest one among the available ones in the ACL
range for the ACL type.
Description Use the
acl ipv6 copy command to copy an existent IPv6 ACL (namely, the
source IPv6 ACL) to generate a new one (namely, the destination IPv6 ACL), which
is of the same type and has the same match order, match rules, rule numbering
step and descriptions.
Note that:
■ The source IPv6 ACL and the destination IPv6 ACL must be of the same type.
■ The generated ACL does not take the name of the source IPv4 ACL.
■ A simple IPv6 ACL does not support this feature.
Example # Copy ACL 2008 to generate ACL 2009.
<Sysname> system-view
[Sysname] acl ipv6 copy 2008 to 2009
acl ipv6 name
Syntax acl ipv6 name acl6-name
View System view
Parameter acl6-name: Name of the IPv6 ACL, a case insensitive string of 1 to 32 characters. It
must start with an English letter and cannot be the English word of all to avoid
confusion.