Filter
Top Products
1963
NAS transmits the request for the specified maximum number, it sends another
trap message.
■ If the specified maximum number of transmission attempts is odd, the half of
the number refers to the smallest integer greater than the half of the number.
Example # Enable the RADIUS trap function for accounting servers.
<Sysname> system-view
[Sysname] radius trap accounting-server-down
reset radius statistics
Syntax reset radius statistics
View User view
Parameter None
Description Use the
reset radius statistics command to clear RADIUS statistics.
Related command: display radius scheme.
Example # Clear RADIUS statistics.
<Sysname> reset radius statistics
reset stop-accounting-buffer
Syntax reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name }
View User view
Parameter radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name,
which is a string of 1 to 32 characters.
session-id session-id: Specifies a session by its ID, a string of 1 to 50 characters.
time-range start-time stop-time: Specifies a time range by its start time and end
time in the format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name: Specifies a user name based on which to reset the
stop-accounting buffer. The username is a case-sensitive string of 1 to 80
characters. The format of the user-name argument (for example, whether the
domain name should be included) must comply with that specified for usernames
to be sent to the RADIUS server in the RADIUS scheme.