Filter
Top Products
1312 CHAPTER 85: IPV6 RIPNG CONFIGURATION COMMANDS
display ripng interface
Syntax display ripng process-id interface [ interface-type interface-number ]
View Any view
Parameters process-id: RIPng process number, in the range of 1 to 65535.
interface-type interface-number: Specified an interface.
Description Use the
display ripng interface command to display the interface information
of the RIPng process.
If no interface is specified, information about all interfaces of the RIPng process
will be displayed.
Examples # Display the interface information of RIPng process 1.
<Sysname> display ripng 1 interface
Interface-name: Ethernet1/0
Link Local Address: FE80::20F:E2FF:FE30:C16C
Split-horizon: on Poison-reverse: off
MetricIn: 0 MetricOut: 1
Default route: off
Summary address:
3:: 64
3:: 16
Table 318 Description on the fields of the display ripng interface command
Field Description
Interface-name Name of an interface running RIPng.
Link Local Address Link-local address of an interface running RIPng
Split-horizon Indicates whether the split horizon function is enabled (on:
Enabled off: Disabled).
Poison-reverse Indicates whether the poison reverse function is enabled (on:
Enabled off: Disabled).
MetricIn/MetricOut Additional metric to incoming and outgoing routes
Default route
■ Only/Originate: Only means that the interface advertises only
default route. Originate means that the default route and
other RIPng routes are advertised.
■ Off, indicates that no default route is advertised or the
garbage-collect time expires after the default route
advertisement was disabled.
■ In garbage-collect status: With default route advertisement
disabled, the interface advertises the default route with metric
16 during the garbage-collect time.
Summary address The summarized IPv6 prefix and the summary IPv6 prefix on the
interface