Filter
Top Products
428 CHAPTER 26: LAPB AND X.25 CONFIGURATION COMMANDS
display x25 switch-table pvc
Syntax display x25 switch-table pvc
View Any view
Parameter None
Description Use the
display x25 switch-table pvc command to display X.25 PVC switching
table.
Example # Display X.25 PVC switching table.
<Sysname> display x25 switch-table pvc
#1 (In: Serial1/1-vc1024)<- ->(Out: Serial1/0-vc1)
#2 (In: Serial1/0-vc1024)<- ->(Out: Serial1/1-vc1)
display x25 switch-table svc
Syntax display x25 switch-table svc { dynamic | static }
View Any view
Table 59 Description on the fields of the display x25 pad command
Field Description
UI-INDEX130: User interface index
From remote 22 connected to local
11, State: Normal
Connection of local X.121 address to remote X.121
address and the current connection state of the PAD.
Connection states:
Normal: Connection is normal
Closing: Connection is being closed
Exception: Connection is abnormal
X.3Parameters(In): Incoming X.3 parameter
X.3Parameters(Out): Outgoing X.3 parameter
Input: Pkts(total/control): 13/2
bytes:12
queue(size/max) :0/200
Total number of packets received/total number of
control packets received
Total size of packets received
Size/maximum size of receiving queue packets
Output:
Pkts(total/control): 15/2 bytes:320
Total number of packets sent/total number of control
packets sent
Size of packets sent
Table 60 Description on the fields of the display x25 switch-table pvc command
Field Description
(In: Serial1/1-vc1024)<- ->(Out: Serial1/0-vc1) Data is exchanged between PVC 1024 of
Serial 1/1 and PVC 1 of Serial 1/0.