Filter
Top Products
1592 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
[6] : 0 (kbps), [7] : 0 (kbps)
BW Unreserved for Class type 1:
[0] : 0 (kbps), [1] : 0 (kbps)
[2] : 0 (kbps), [3] : 0 (kbps)
[4] : 0 (kbps), [5] : 0 (kbps)
[6] : 0 (kbps), [7] : 0 (kbps)
display mpls te link-administration admission-control
Syntax display mpls te link-administration admission-control [ interface interface-type
interface-number ]
View Any view
Parameter interface interface-type interface-number: Specifies an interface by its type and a
number.
Description Use the
display mpls te link-administration admission-control command
to display information about CR-LSPs carried on the link of a specified interface or
links of all interfaces if no interface is specified.
Example # Display information about the CR-LSPs carried on the links of all interfaces.
<Sysname> display mpls te link-administration admission-control
LspID In/Out IF S/H Prio CT BW(kbps)
Table 410 Description on the fields of display mpls te cspf tedb interface
Field Description
MPLS LSR-Id MPLS LSR ID of node
IGP_Type IGP type
Process Id IGP process ID
MPLS-TE Link Count Number of MPLS TE links
Link[x] Specific link, with the bracketed x indicating the
link number
Interface IP Address Interface IP address
DR Address IP address of the DR
IGP Area IGP area
Link Type Link type
Link Status Link status
IGP Metric IGP metric of link
TE Metric TE metric of link
Color Link administrative attribute
Maximum Bandwidth Maximum link bandwidth
Maximum Reservable Bandwidth Maximum reservable bandwidth of link
Bandwidth Constraints Bandwidth constraints
BW Unreserved for Class type0 Unreserved bandwidth at the CT0 level
BW Unreserved for Class type1 Unreserved bandwidth at the CT1 level