Filter
Top Products
1129
Total Nets: 2
Intra Area: 1 Inter Area: 1 ASE: 0 NSSA: 0
display ospf vlink
Syntax display ospf [ process-id ] vlink
View Any view
Parameters process-id: OSPF process ID, in the range 1 to 65535.
Description Use the
display ospf vlink command to display OSPF virtual link information.
If no OSPF process is specified, the OSPF virtual link information of all OSPF
processes is displayed.
Examples # Display OSPF virtual link information.
<Sysname> display ospf vlink
OSPF Process 1 with Router ID 3.3.3.3
Virtual Links
Virtual-link Neighbor-ID -> 2.2.2.2, Neighbor-State: Full
Interface: 10.1.2.1 (Serial2/0)
Cost: 1562 State: P-2-P Type: Virtual
Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit5,Transmit Delay 1
Table 276 Description on the fields of the display ospf routing command
Field Description
Destination Destination network
Cost Cost to destination
Type Route type: intra-area, Transit, stub, Inter-area, Type1 External,
Type2 External.
NextHop Next hop address
AdvRouter Advertising router
Area Area ID
Total Nets Total routes
Intra Area Total intra-area routes
Inter Area Total inter-area routes
ASE Total ASE routes
NSSA Total NSSA routes
Table 277 Description on the fields of the display ospf vlink command
Field Description
Virtual-link Neighbor-id ID of neighbor connected to the router via the virtual link
Neighbor-State Neighbor State: Down, Attempt, Init, 2-Way, ExStart, Exchange,
Loading, Full.
Interface Local interface’s IP address and name of the virtual link