Filter
Top Products
924 CHAPTER 70: TERMINAL ACCESS CONFIGURATION COMMANDS
terminal-number: Terminal number corresponding to the RTC client, ranging 1 to
255.
Description Use the
vty rtc-server remote command to create a VTY to serve as the RTC
server.
Use the
undo vty command to remove the specified VTY.
Note that, after this configuration, no more Telnet VTYs, TTY VTYs, or RTC client
VTYs can be configured in the template of the VTY.
Example # Create a VTY to serve as the RTC server, setting the IP address of the RTC client
to 2.2.2.2 and the terminal number to 1.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] vty 1 rtc-server remote 2.2.2.2 1
vty screencode
Syntax vty vty-number screencode string
undo vty vty-number screencode
View Terminal template view
Parameters vty-number: VTY number, ranging 0 to 7.
string: Terminal screen code, a string of 1 to 15 characters.
Description Use the
vty screencode command to set the screen code for triggering screen
saving.
Use the
undo vty screencode command to cancel the screen code configured.
By default, no screen code is configured for terminal screen saving.
Some types of terminals provide the screen saving function. When such a terminal
receives the specified screen code, such as E!10Q (for details about screen codes,
refer to the related terminal manuals), it saves the current interface and switch to
the corresponding screen.
Note that this function requires terminal support and the screen code configured
on the router and that specified on the terminal must be the same. Screen codes
configured vary with terminal types. For details, refer to the corresponding
terminal manuals. For example, Start terminals support E!8Q, E!9Q, E!10Q,
E!11Q, E!12Q, and E!13Q. To support screen saving and menu printing, the menu
screencode command must be used.
Related command: menu screencode.