Filter
Top Products
481
Description Use the port link-aggregation group command to add the Ethernet port to a
link aggregation group (manual or static LACP).
Use the
undo port link-aggregation group command to remove the Ethernet
port from a link aggregation group.
Related command: display link-aggregation verbose.
Example # Assign port Ethernet 1/0 to link aggregation group 22.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] port link-aggregation group 22
port-group aggregation
Syntax port-group aggregation agg-id
View System view
Parameter agg-id: Aggregation port group ID, in the range 1 to 144.
Description Use the
port-group aggregation command to enter aggregation port group
view.
Instead of being created administratively, an aggregation port group is created
automatically upon creation of a link aggregation group and assigned the ID of
the link aggregation group. In aggregation port group view, you can configure
aggregation related settings such as STP, VLAN, QoS, GVRP, and MAC address
learning, but cannot add or remove member ports.
Example # Enter aggregation port group view.
<Sysname> system-view
[Sysname] port-group aggregation 10
[Sysname-port-group-aggregation-10]
reset lacp statistics
Syntax reset lacp statistics [ interface interface-type interface-number [ to interface-type
interface-number ]]
View User view
Parameter interface interface-type interface-number [ to interface-type interface-number ]:
Specifies an interface range or an interface if the to keyword and the second
interface are not specified.