Filter
Top Products
981
Parameters group-name: Name of a peer group, a string of 1 to 47 characters.
external: Creates an EBGP peer group, which can be the group of another sub AS
in a confederation.
internal: Creates an IBGP peer group; not supported in BGP-VPN instance view.
Description Use the group command to create a peer group.
Use the
undo group command to delete a peer group.
An IBGP peer group is created if neither internal nor external is specified.
Examples # In BGP view, create an EBGP peer group test with AS number 200, and add
EBGP peers 10.1.1.1 and 10.1.2.1 into the group.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 200
[Sysname-bgp] peer 10.1.1.1 group test
[Sysname-bgp] peer 10.1.2.1 group test
# In BGP-VPN instance view, create an EBGP peer group test with AS number 200,
and add EBGP peers 10.1.1.1 and 10.1.2.1 into the group (the VPN has been
created).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] group test external
[Sysname-bgp-vpn1] peer test as-number 200
[Sysname-bgp-vpn1] peer 10.1.1.1 group test
[Sysname-bgp-vpn1] peer 10.1.2.1 group test
import-route (BGP/BGP-VPN instance view)
Syntax import-route protocol [ process-id [ med med-value | route-policy
route-policy-name ] * ]
undo import-route protocol [ process-id ]
View BGP view/BGP-VPN instance view
Parameters protocol: Redistributes routes from the specified routing protocol, which can be
direct, isis, ospf, rip, or static at present.
process-id: Process ID, in the range 1 to 65535. The default is 1. It is available only
when the protocol is isis, ospf, or rip.
med-value: Specifies the MED value to be applied to redistributed routes, ranging
from 0 to 4294967295. If the argument is not specified, the cost of the
redistributed route is used as its MED in the BGP routing domain.