Filter
Top Products
2505
poe utilization-threshold
Syntax poe utilization-threshold utilization-threshold-value [ pse pse-id ]
undo poe utilization-threshold [ pse pse-id ]
View System view
Parameter utilization-threshold-value: Power alarm threshold in percentage, in the range 1 to
99.
pse pse-id: Specifies a PSE ID. The support for this argument varies with devices.
pse-id indicates number of the slot where a PoE interface locates.
Description Use the
poe utilization-threshold command to configure a power alarm
threshold for the PSE.
Use the
undo poe utilization-threshold command to restore the default
power alarm threshold of the PSE.
By default, the power alarm threshold for the PSE is 80%.
The system sends a Trap message when the percentage of power utilization
exceeds the alarm threshold. If the percentage of the power utilization always
keeps above the alarm threshold, the system does not send any Trap message.
Instead, when the percentage of the power utilization drops below the alarm
threshold, the system sends a Trap message again.
Example # Set the power alarm threshold of PSE 2 to 90%.
<Sysname> system-view
[Sysname] poe utilization-threshold 90 pse 2
poe-profile
Syntax poe-profile profile-name [ index ]
undo poe-profile { index index | name profile-name }
View System view
Parameter profile-name: Name of a PoE configuration file, a string of 1 to 15 characters. A
PoE configuration file name begins with a letter (a through z or A through Z) and
must not contain reserved keywords such as undo, all, name, interface, user,
poe, disable, max-power, mode, priority and enable.
index: Index number of a PoE configuration file, in the range of 1 to 100.
Description Use the
poe-profile profile-name command to create a PoE configuration file
and enter PoE-profile view.