Filter
Top Products
1370 CHAPTER 89: MSDP CONFIGURATION COMMANDS
display msdp sa-count
Syntax display msdp [ vpn-instance vpn-instance-name | all-instance ] sa-count
[ as-number ]
View Any view
Parameter vpn-instance-name: VPN instance name, a case sensitive string of up to 31
characters.
all-instance: Specifies all VPN instances.
as-number: AS number, in the range of 1 to 65535.
Description Use the
display msdp sa-count command to view the number of SA messages
in the MSDP cache.
This command gives the corresponding output only after the cache-sa-enable
command is executed.
Related command: cache-sa-enable.
Example # View the number of SA messages in the MSDP cache in the public instance.
<Sysname> display msdp sa-count
MSDP Source-Active Count Information of VPN-Instance: public net
Number of cached Source-Active entries, counted by Peer
Peer’s Address Number of SA
10.10.10.10 5
Number of source and group, counted by AS
AS Number of source Number of group
?3 3
Total 5 Source-Active entries
Table 334 Description on the fields of the display msdp sa-count command
Field Description
Number of cached Source-Active entries,
counted by Peer
Number of SA messages counted by peer
Peer’s Address MSDP peer addresses
Number of SA Number of SA messages from this peer
AS Number of the AS where the MSDP peer is located.
“?” indicates that the system was unable to obtain
the AS number.
Number of source Number of multicast sources from this AS
Number of group Number of multicast groups from this AS