Filter
Top Products
1432 CHAPTER 91: IPV6 MULTICAST ROUTING AND FORWARDING CONFIGURATION COMMANDS
View Any view
Parameter ipv6-source-address: IPv6 multicast source address.
ipv6-group-address: IPv6 multicast group address, in the range of FFxy::/16, where
x and y represent any hexadecimal number from 0 through F.
prefix-length: Prefix length of the IPv6 multicast group/source address. For an IPv6
multicast group address, this argument has an effective value range of 8 to 128;
for an IPv6 multicast source address, this argument has an effective value range of
0 to 128. The system default is 128 in both cases.
incoming-interface: Displays the routing entries whose incoming interface is the
specified ones.
interface-type interface-number: Interface type and interface number.
register: Represents a registered interface.
outgoing-interface: Displays the routing entries whose outgoing interface is the
specified ones.
exclude: Displays the routing entries whose outgoing interface list (OIL) excludes
the specified interface.
include: Displays the routing entries whose OIL includes the specified interface.
match: Displays the routing entries whose OIL includes and includes only the
specified interface.
statistics: Specifies to display the statistics information of the IPv6 multicast
forwarding table.
port-info: Displays Layer 2 port information.
Description Use the
display multicast ipv6 forwarding-table command to display
information of an IPv6 multicast forwarding table.
Related command: multicast ipv6 forwarding-table downstream-limit, multicast ipv6
forwarding-table route-limit, and display multicast ipv6 routing-table.
Example # Display information of an IPv6 multicast forwarding table.
IPv6 Multicast Forwarding Table
Total 1 entry
Total 1 entry matched
00001. (2000:5::1:1000, FF1E::1234)
MID: 0, Flags: 0x0:0
Uptime: 04:04:37, Timeout in: 00:03:26
Incoming interface: Ethernet1/0
List of 1 outgoing interfaces:
1: Ethernet1/1