Filter
Top Products
2599
line
Syntax line line-number
undo line
View POTS entity view
Parameter line-number: Number of a subscriber line.
Description Use the
line command to associate the voice entity with a specified voice
subscriber line.
Use the
undo line command to remove this association.
By default, there is no association between a voice entity and a voice subscriber
line.
Example # Associate voice entity 10 and voice subscriber line 1/0.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] line 1/0
match-template
Syntax match-template match-string
undo match-template
View POTS/VoIP/VoFR entity view
Parameter match-string: Number template. Its format is [ + ] { string [ T ] [ $ ] | T }, with the
maximum length of 31 characters. The characters are described in the following.
■ +: Appears at the beginning of a calling number to indicate that the number is
E.164-compliant.
■ $: Is the last character, indicating the end of the number. That means the entire
called number must match the string part before “$”.
■ T: Timer. It means the system is waiting the subscriber for dialing any number
till: the number length threshold is exceeded, or the subscriber inputs the
terminator; or the timer expires. T is used to match a number with any digits.
■ string: A string composed of any characters of “0123456789#*.!+%[]()-”. The
meanings of the characters are described in the following table: