Filter
Top Products
1572 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
vpn-instance vpn-instance-name: Specifies a VPN instance. The
vpn-instance-name argument is a string of 1 to 31 characters. For the default VPN
instance, you do not need to configure this keyword and argument combination.
Description Use the
display isis traffic-eng statistics command to display the statistics
about TE for IS-IS.
If no IS-IS level is specified, the statistics about TE in the IS-IS Level-1-2 area is
displayed.
Example # Display statistics about TE for IS-IS.
<Sysname> display isis traffic-eng statistics
TE information for ISIS(1)
--------------------------
TE Statistics Information
-------------------------
IS-IS System Type : Level-1-2
IS-IS Cost Style Status : Wide
IS-IS Level-1 Traffic Engineering Status : Disabled
IS-IS Level-2 Traffic Engineering Status : Enabled
IS-IS Router ID : 1.1.1.9
display isis traffic-eng sub-tlvs
Syntax display isis traffic-eng sub-tlvs [ process-id | vpn-instance vpn-instance-name ]
View Any view
Parameter process-id: IS-IS process ID, in the range 1 to 65535.
vpn-instance vpn-instance-name: Specifies a VPN instance. The
vpn-instance-name argument is a string of 1 to 31 characters. For the default VPN
instance, you do not need to configure this keyword and argument combination.
Description Use the
display isis traffic-eng sub-tlvs command to display information
about sub-TLVs for the IS-IS TE extension.
If no IS-IS level is specified, information about TE extension sub-TLVs in the IS-IS
Level-1-2 area is displayed.
Related command: te-set-subtlv.
Table 392 Description on the fields of the display isis traffic-eng statistics command
Field Description
IS-IS System Type System type
IS-IS Cost Style Status Cost type of the router
IS-IS Level-1 Traffic Engineering Status TE state of Level-1 router
IS-IS Level-2 Traffic Engineering Status TE state of Level-2 router
IS-IS Router ID IS-IS router ID