Filter
Top Products
1678 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS
<Sysname> display bgp vpnv4 all paths
Address Hash Refcount MED Path/Origin
0x6E72D80 4 1 0 200?
0x6E72CB0 15 2 0 ?
display bgp vpnv4 peer
Syntax display bgp vpnv4 { all | vpn-instance vpn-instance-name } peer [ group-name
log-info | ip-address { log-info | verbose } | verbose ]
View Any view
Parameter all: Specifies all VPNv4 peers.
vpn-instance-name: Name of the VPN instance, a string of 1 to 31 characters.
group-name: Name of the peer group, a string of 1 to 47 characters.
log-info: Displays log information.
ip-address: IP address of the peer.
verbose: Displays detailed information.
Description Use the
display bgp vpnv4 peer command to display information about BGP
VPNv4 peers.
Example # Display information about BGP VPNv4 peers of VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 peer
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
10.1.1.1 4 200 24 29 0 1 00:18:47 Established
Table 446 Description on the fields of the display bgp vpnv4 paths command
Field Description
Address Routing address in the local database
Hash Hash bucket for storing routes
Refcount Number of times that the path is referenced
MED Metric for routes
Path/Origin AS_PATH and origin attributes of the route, see Table 443.
Table 447 Description on the fields of display bgp vpnv4 vpn-instance peer
Field Description
BGP Local router ID Router ID of the local BGP router
local AS number Local AS number
Total number of peers Total number of peers
Peers in established state Number of peers in the state of established