Filter
Top Products
1858 CHAPTER 123: MPLS QOS CONFIGURATION COMMANDS
queue: Queue number of CQ, in the range 0 to 16.
exp-value: EXP domain of MPLS packet, in the range 0 to 7. Up to 8 can be
configured, separated with space.
Description Use the
qos cql protocol mpls exp command to configure CQ classification
rule based on the MPLS protocol.
Use the
undo qos cql protocol mpls exp command to delete the
corresponding classification rule.
For the same cql-index, this command can be used repeatedly to establish multiple
types of classification rules for IP packets.
When multiple rules are present, the device matches packets in the sequence that
rules are configured.
Related commands: qos cql protocol.
Examples # Configure classification rule based on the MPLS protocol CQL 10, and sets the
queue 1 to correspond with EXP value 1.
<Sysname> system-view
[Sysname] qos cql 10 protocol mpls exp 1 queue 1
qos pql protocol mpls exp
Syntax qos pql pql-index protocol mpls exp exp-value queue { top | middle | normal |
bottom }
undo qos pql pql-index protocol mpls exp exp-value
View System view
Parameters pql-index: Group number of priority queuing list (PQL), in the range 1 to 16.
queue: Queue name, which is valued top, middle, normal and bottom.
exp-value: EXP domain value of MPLS packet, in the range 0 to 7. Up to 8 can be
configured, separated with space.
Description Use the
qos pql protocol mpls exp command to establish the PQL classification
rule based on MPLS protocol.
Use the
undo qos pql protocol mpls exp command to delete corresponding
PQL classification rules.
For the same pql-index, this command can be used repeatedly to establish several
types of PQL classification rules for IP packets.