Filter
Top Products
www.digiembedded.com
361
Ethernet Communication Module
MII Management Address register
Address: A060 0428
Register bit assignment
D01 R/W SCAN 0 Automatically scan for read data
Set to 1 to have the MII Management module perform
read cycles continuously. This is useful for
monitoring link fail, for example.
Note: SCAN must transition from a 0 to a 1 to
initiate the continuous read cycles.
D00 R/W READ 0 Single scan for read data
Set to 1 to have the MII Management module perform
a single read cycle. The read data is returned in the
MII Management Read Data register after the BUSY
bit in the MII Management Indicators register has
returned to a value of 0.
Note: READ must transition from a 0 to a 1 to
initiate a single read cycle.
Bits Access Mnemonic Reset Description
Table 219: MII Management Command register
Bits Access Mnemonic Reset Description
D31:13 N/A Reserved N/A N/A
Table 220: MII Management Address register
Reserved
13121110987654321015 14
31 29 28 27 26 25 24 23 22 21 20 19 18 17 1630
DADRReserved Reserved RADR