Filter
Top Products
www.digiembedded.com
839
Timing
System PLL bypass mode timing
Table 483 describes the values shown in the system PLL bypass mode timing diagram
(Figure 148).
Note:
1 The system PLL can be bypassed. In this mode, the CPU clock speed is 1/2 of x1_sys_osc.
2 The minimum high/low time on system clock input pin when used with an external oscillator is 1.5nS.
Figure 148: System PLL bypass mode timing
Parm Description Min Max Unit Notes
SC1 x1_sys_osc cycle time 2.5 5 ns 1
SC2 x1_sys_osc high time (SC1/2) x 0.45 (SC1/2) x 0.55 ns
SC3 x1_sys_osc low time (SC1/2) x 0.45 (SC1/2) x 0.55 ns
Table 483: System PLL bypass mode timing parameters
SC1
SC2SC2 SC3
SC1
SC3
x1_sys_osc