DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-392DID-BD (Direct Inward Dial Trunk Circuit Pack)
10
DID-BD (Direct Inward Dial Trunk
Circuit Pack)
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also DID-TRK (DID Trunk) Maintenance
documentation for related trunk information.
1. Where P is the port network number (1 for PPN and 2 or; C is the carrier designation (for example,
A, B, C, D, or E); and SS is the address of the slot in the carrier where the circuit pack is located
(for example, 01, 02, ..., etc.).
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run
1
Full Name of MO
DID-BD MIN test board PCSS sh Direct Inward Dial Trunk Circuit Pack
DID-BD WRN test board PCSS sh Direct Inward Dial Trunk Circuit Pack