Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-322test analog-testcall
8
test analog-testcall
The test analog-testcall command performs facility diagnostic tests on an entire
trunk group, an individual trunk group member, an individual trunk port or on all
trunks on a board, depending on the options entered. The type of test call, the
far-end test line number, and the various other parameters must be administered
on the trunk group form before executing the command. Normally, the user
should only invoke the full or supervision test. The other options are provided
primarily for testing when setting up an ATMS schedule.
Test results section
Port Port address (cabinet-carrier-slot-circuit)
Maintenance
Name
The name of maintenance object
Alt. Name Alternate way to identify maintenance objects.
If the Object is The field contains
station extension
trunk
xxx/yyy
(where
xxx
= trunk group number
and
yyy
= member number)
private CO line
P/xxx
(where
xxx
= private CO line group
number)
Test No The test being executed
Result Test result: Fail, Pass, Abort, or No Board. If this field has conflict,
another user may be testing this hardware. If this field has
epn-down, the epn is inaccessible at this time.
Error Code Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.