Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-188BRI-SET, ASAI-ADJ, BRI-DAT
10
o. For the Error 2567 indicates that the version of ASAI is not supported,
check version of the software running on the ASAI or AT&T adjunct.
p. For Error 2568 indicates that the adjunct id is invalid, check the vender id
or software running on the AT&T adjunct.
Table 10-67. ISDN-BRI Cause Values
Code Explanation Recommendation
Channel in Use
1 Requested channel is in use by another station on
the BRI-PORT. (Not applicable for ASAI or AT&T
adjuncts.)
For BRI endpoints:
1. Try to originate a call to or from this port.
2. If the error persists, busy out and release the
port.
3. If the problem still persists, replace stations on
the port.
4. If the problem still persists, escalate to the next
tier.
SWITCH
RESOURCES
NOT AVAILABLE
34 No circuit or
channel
available
A resource on the switch is unavailable for a call.
For BRI endpoints: This cause value is not logged.
For ASAI or AT&T Adjuncts: This condition means
that there are no available trunks for an outgoing
call request.
1. Verify that the adjunct is administered to
support the trunk capabilities of the switch.
2. Investigate trunk group status by issuing status
trunk commands from the SAT or by requesting
a trunk group query or queries from the adjunct.
3. Perform trunk diagnostic procedures outlined in
this manual.
4. If step 3 does not resolve the problem, escalate
to the next tier.
Continued on next page