Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-196restore announcements
8
■ Two hardware switches are associated with active and standby SPEs.
These hardware switches override demand maintenance activities
requested by system technicians. If active SPEs are locked active with
these hardware switches, interchanges do not occur until the active is
unlocked.
■ Successful SPE interchanges logoff PPNSAT terminals.
■ Restart levels null the effect of the health-override option.
restore announcements
This command copies announcement data from the active MSS devices to
announcement boards.
Feature Interactions
!
WARNING:
Manager I is blocked for other activities until the command completes (up
to 45 minutes)
■ If no announcement data module and no NETCON data module are
administered, the system denies the command.
■ If the announcement data module port is out of service or active (for
example, performing an announcement playback), the system denies the
command.
1. Refer to the Report Scheduler and System Printer feature specification for more details.
Action/
Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
restore
announce-
ments
print
schedule]
Report sent to printer.
Command is validated and
then a scheduling form
displays to schedule
execution of the
command. The command
is then placed in the
command queue and is
executed at the specified
time. The information
displayed by the
command is sent to the
system printer instead of
the screen.
1
Examples:
restore announcements
init
inads
craft
cust
rcust
Tape-based:
Announcement
copies from active
processor’s tape to
the announcement
board.
Card-mem based:
Announcement
data copies from
active processor’s
to the
announcement
board.
see below