Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-639EXP-INTF (Expansion Interface Circuit Pack)
10
If the Expansion Interface circuit pack to be tested is part of an Active link from
PPN to either EPN, the path shown in Figure 10-31 is used.
If the Expansion Interface circuit pack to be tested is on either EPN and is part of
a Standby link from PPN to either EPN, the path shown in Figure 10-32 is used.
The path in this figure is also used if the Expansion Interface circuit pack to be
tested is on the PPN.
If the Expansion Interface circuit pack to be tested is part of a link from EPN to
EPN, the path shown in Figure 10-33 is used.
Figure 10-31. (Active EXP-INTFs on EPNs Only)
Figure 10-32. (Standby EXP-INTFs on EPNs or PPN EXP-INTFs Only)
EXP-INTF EXP-INTF
Packet Bus (PPN) Packet Bus (PN X)
PKT-
ACTIVE LINK
CTRL
LAPD
ENDPT
PKT-
CTRL
EXP-INTF EXP-INTF
Packet Bus (PPN)
Packet Bus (PN X)