Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-264status conference
8
Endpoint Miscellaneous (EPT MISC) Information. EPT MISC contains
miscellaneous states and counters for an endpoint. Flags can y or n. Counters
start with 0x00, increment to 0xff, and wrap around to 0x01. AIM and VIS are
BAS commands that can be sent as input to MCU from an endpoint or as output
from MCU to an endpoint
Field descriptions
.
MLP
Multi Layer Protocol data mode. When technicians administer Data
Modes as any-mlp or ww-pcs, MLP modes should be var-MLP.
Other values affect video status.
MLP modes should be MLP-off when technicians administer Data
Modes as none. Other values in this mode affect video status.
H_MLP
The High Speed MLP mode. The HMLP mode should be H-MLP-off.
Other values in this mode affect video status.
LSD
Low Speed Data mode. The LSD mode should be LSD-off. Other
values in this mode affect video status.
HSD
High Speed Data mode. The HSD mode should be HSD-off. Other
values in this mode affect video status.
CRYPT
Encryption mode. The CRYPT mode should be encrypt-off. Other
values in this mode affect video status.
S/M
Single/Multi channel interoperability mode. 6B-H0-comp indicates
that the sender is interoperating multiple channels and a single
channel (for example, 6B and H0). Not-comp-6B-H0 indicates that
the sender is not interoperating between 6B and H0. Normally this
value is Not-comp-6B-H0. Other values in this mode affect video
status.
AIM
Audio Indicate Mutes.
“y” = For input, this endpoint mutes its audio. MCU does not VAS to an
endpoint displaying mute. For output, all other endpoints in the
conference mute their audio (have sent AIM to MCU). MCU in turn tells
this endpoint (by sending it AIM) that there is no audio output from
MCU.
“n” = For input, this endpoint does not mute (only if endpoint audio
mode is turned on). For output, an audio path opens across the bridge.
VIS
Video Indicate Suppressed.
“y” = For input, this endpoint suppresses its video (video is muted). For
output, the MCU is not sending video to this endpoint because there is
no video broadcaster (broadcaster does not join or broadcaster’s video
is invalid).