Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-100list config software-version
8
list config software-version
This command displays
■ Software version numbers and compatibility indexes of the software load
modules stored in system memory (RAM) and on the Mass Storage
System devices (tape).
■ The dates and times when translation and announcement data were last
saved to the MSS.
■ Information about any software update files that have been applied to the
system. See “Software Upgrade” in Chapter 5, ‘‘
Routine Maintenance
Procedures’’ for an explanation of software versions and compatibility
indexes.
Output
If the tape or memory card contains a core dump file, fields for tape or memory
card data display coredump. When a core dump is present, all other files on the
device are marked invalid.
If the memory card cannot be read at the time the command is entered, the
relevant fields display no tape or memory card. (This does not indicate that
the system does not recognize the presence of the device.)
The following display shows the output from the list configuration
software-version command.
1. On high and critical reliability systems, only fields for the active SPE are displayed unless the long option is specified.
2. Fields in the SPE-B column are blank for standard reliability systems.
3. Refer to the Report Scheduler and System Printer feature specification for more details.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
list configuration
software-version
memory-resident |
long
1
print
schedule
Data for the active SPE or both
SPEs (High or Critical reliability
systems)
2
Report sent to printer.
Command is validated and then a
scheduling form displays to
schedule execution of the
command. The command is then
placed in the command queue and
is executed at the specified time.
The information displayed by the
command is sent to the system
printer instead of the screen.
3
RAM-resident files only. Fields for
tape data contain n/a
init
inads
craft
none none