Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-11busyout packet-control
8
Output
Field descriptions
busyout packet-control
This command places the packet-control circuit pack in a maintenance busy
state, and tears down each point-to-point signaling link that terminates on this
packet-control. No periodic or scheduled test is performed on the busied out
packet-control until it is released. A warning alarm (error type 18) is generated on
the busied out packet-control, so that INADS can determine the state of the
object. The release packet-control command reactivates the board and initiates
recovery on all point-to-point signaling links terminated on this packet-control.
Port
Port address (cabinet-carrier-slot-circuit)
Maintenance Name
Name of busied out maintenance object: MODEM-PT
Alt. Name
Not applicable
Result
Test result: Pass, Abort, Fail
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
busyout modem-pool 1 SPE B
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C0701 MODEM-PT PASS
01C0703 MODEM-PT PASS
Command successfully completed