Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-313status tti
8
Output
The following example shows the output for the status tsc-administered 1/1
command.
Field descriptions
status tti
This command displays the status (active/not active) of the tti background
maintenance task, and, if it is active, it displays whether tti ports are being
generated or removed, the number of tti-supported boards that have processed,
TSC Index The administered TSC index (1-64).
TSC State State of the administered TSC:
■ inactive: the administered TSC is not functioning (for example,
D-channel out-of-service, or disabled)
■ active: indicates that the administered TSC is up and user
information can be exchanged end-to-end.
■ pending-inactive: shows that the TSC is being released.
■ pending-active: the TSC is about to come up
Establish The switch responsible for the origination of the administered TSC:
■ as-needed: TSC is established on an as needed basis
■ permanent: TSC is permanently established
Enabled Indicates if the administered TSC’s have been enabled ("yes" or "no").
Congested Administered TSC congestion history (whether or not the network can
handle the receipt of USER INFORMATION messages for the
administered TSC):
■ yes: TSC is congested
■ no: TSC is not congested
■ clear: TSC congestion was cleared during its active period
status tsc-administered 1/1
ADMINISTERED NON-CALL-ASSOCIATED TSC STATUS
TSC TSC
Index State Establish Enabled Congested
1 inactive as-needed yes no