Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Object Repair Procedures
Page 10-109ANN-PT (Announcement Port)
10
b. This error is logged and the port is alarmed when an alarm is raised on the
Announcement circuit pack because of a faulty condition with a common
circuit pack resource. Any one of the following alarmed errors on the
Announcement circuit pack causes this error to be logged against the
Announcement Port: 1793, 2049, 2305, 2561. Follow the ANN-BD
(Announcement Circuit Pack) Maintenance documentation to resolve
these alarms. When the corresponding circuit pack alarm is cleared, this
alarm clears.
System Technician-Demanded Tests:
Descriptions and Error Codes
Always investigate tests in the order presented in the table below when
inspecting errors in the system. By clearing error codes associated with the
Channel Administration Memory Array (CAMA) Test,
for example, you may also
clear errors generated from other tests in the testing sequence.
Channel Administration Memory Array (CAMA)
Test (#205)
This test is a memory device that stores information used to control the 140AY
device. The Angel asynchronously feeds the CAMA with the control information.
During the CAMA test, the Angel writes patterns into the CAMA, reads them
back, and verifies that they match. If the patterns do not match, the test fails. This
test is run periodically by the switch maintenance and by the Announcement
circuit pack in the background.
1. D = Destructive; ND = Nondestructive
Order of Investigation
Short Test
Sequence
Long
Test
Sequence D/ND
1
Channel Administration Memory Array
(CAMA) Test (#205)
XND
Playback Speech Memory Array (PSMA)
Test (#206)
XXND
140AY Channel Sanity Inquiry Test (#222) X X ND