Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-299status station
8
Output
The following example shows the output for the status station 1002 command.
Field descriptions
Type Administered station type
Extension Station or attendant extension
Port Port location: cabinet-carrier-slot-circuit
Call Park Whether the station has a call parked (yes or no)
Ring Cut Off
Activated
Whether ring cut off is activated (yes or no)
CF
Destination
Ext
Call forwarding destination extension, if any.
Message
Waiting
Whether there is a message waiting for the station. "AP-SPE",
"AUDIX", "PMS" or blank if no messages are waiting.
Connected
Ports
Port locations of the facilities to which the station is connected:
cabinet-carrier-slot-circuit
Agent Logged
In
Displays (underneath) the hunt groups (up to 3) that the agent is
logged into
On ACD Call? Whether the agent is on an ACD call currently (yes or no).
Work Mode Work mode of each hunt group that an agent is logged into
status station 1002
GENERAL STATUS
Type: 7405D Service State: in-service/on-hook
Extension: 1002 Maintenance Busy? no
Port: 01C0702 SAC Activated? no
Call Parked? no User Cntrl Restr: none
Ring Cut Off Act? no Group Cntrl Restr: none
CF Destination Ext:
Message Waiting:
Connected Ports:
ACD STATUS HOSPITALITY STATUS
Agent Logged In Work Mode AWU Call At:
User DND: not activated
Group DND: not activated
Room Status: non-guest room
On ACD Call? no