Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-55display communication-interface
8
Output for Processor-Channel Object
When you enter the command: display comm proc, the systems displays
Processor Channel Assignment screen, similar to the figure below.
Field descriptions
Identification This field records the type and identification number of the
machine connected to this link. This field is for informational
purposes only.
Proc Chan
The field identifies one of the processor channels on the
processor link. The valid range for a processor link is 1 to 16.
Each interface link corresponds to a port on a PGATE board.
The Processor channel is not administered.
To specify a network channel to a remove machine, use this
link/logical channel pair and the one specified in the interface
link and interface channel field.
Application
This field specifies the type of application that connects to this
processor channel. The following lists the valid entries:
Interface Link
The interface link to which the processor channel is connected.
Interface Chan
The channel on the interface link to which the processor
channel is connected.
Local Port
The switch application port used by the local session.
display communication-interface processor-channels Page 1 of 8
PROCESSOR CHANNEL ASSIGNMENT
Proc Interface Local Remote Adjunct
Chan Application Link Chan Port Port Name Machine-ID
1: dcs 3 1 1 1 13
2: audix 1 1 59 11 AUDIX1 1
3: audix 2 1 59 11 audix2 2
4: gateway 1 10 59 10
5: gateway 1 9 59 9
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
16: