Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-132test pms-link
A
For any system, if the length of the user entered parameter "port network" exceeds 3 the
following message will be displayed:
Entry invalid
If the packet bus is not activated the following message will be displayed:
Packet Bus is not activated,
check system-parameters maintenance form
If no tests can be found for the associated MO, the following message is displayed:
No tests for this MO
If the software data cannot be sent to the SAT, the following message is displayed:
Error encountered, can’t complete request
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later
test pms-link
Help Messages
If the system technician presses HELP after entering "test pms-link" the following
message will be displayed:
Enter [’long’ or ’short’],
[’repeat’ (1-100) or ’clear’], [’schedule’]
Error Messages
If the link is not administered, the following error message will be displayed:
Link not administered or not enabled
If no tests can be found for the link, the following message will be displayed:
No tests for this MO