Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-8busyout link
8
Field descriptions
busyout link
This command places maintenance objects associated with a specified link in a
maintenance busy state. No periodic or scheduled tests are performed on the
busied out maintenance objects until they are released. The link is marked out of
service and is inaccessible to call processing. Warning alarms (error type 18) are
generated on each busied out maintenance object, so that INADS can determine
the state of the objects. The release link command reactivates the objects.
Output
The following example shows the output from the busyout link 1 command. The
responses display on a test-by-test basis with one line of data for each test result.
Port
Physical object port address: 0 = wakeup log, 1 = pms log
Maintenance Name
The name of the maintenance object
Alt. Name
Not applicable
Result
Test result: Pass, Abort, Fail
Error Code
Numeric code explaining why the release failed or aborted. Refer
to the detailed list of the codes by test number for each MO.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
busyout link
link-id
Processor Interface circuit pack
1a1 or 1b1 = 1 – 4
Processor Interface circuit pack
1a2 or 1b2 = 5 – 8
Examples
busyout link 1
init
inads
craft
none none
busyout link 1 SPE A
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C0301 PI-LINK PASS
Command successfully completed