Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-253status conference
8
Rate Adpt Rate adaptation/Interworking indicator = 5, 6, y, c, e, n, blank. 5 and
6 apply to Low Speed/High Speed Interworking. All other values apply
to Rate Adaptation.
“5”= 56-kbps (Low Speed) endpoints join High Speed (128 kbps or
above) conferences. This endpoint connects with audio only
capability, but is not a valid video source and destination.
“6” = 64-kbps (Low Speed) endpoints join High Speed (128 kbps or
above) conferences. This endpoint connects with audio only
capability, but is not a valid video source and destination.
“y” = This endpoint joins the conference at 64 kbps, but because
another endpoint triggers rate adaptation to 56 kbps, this endpoint
rate adapts to 56 kbps.
“c” = 64 kbps endpoints join the conference at 56 kbps. The first 56
kbps endpoint that joins 64 kbps rate adaptable conferences triggers
rate adaptation (see Join Time below).
“n” = Another endpoint triggers a 64-kbps conferences to rate adapt
to 56 kbps. This endpoint joins the conference at 64 kbps, but
encounters problems with rate adapting to 56 kbps. This endpoint
may have audio and may be receiving video, but is not a valid video
source.
“blank” = No endpoint triggers rate adaptation. If this endpoint is
active, it joins the conference at the administered bandwidth.
Bond Mode BONDing Mode - blank. This field is blank for calls that are not related
to bonding.
Ts The talking state of the endpoint - t, m, M, S, blank.
“t” = The endpoint detects voice energy (talking).
“m” = The endpoint indicates that it is muted to the MCU. Endpoints
may mute, but not send an indication to the MCU.
“M” = UDD/CRCS Agent interface mutes the endpoint’s audio. M
displays when both the endpoint and the UCC/CRCS Agent mute the
endpoint audio.
“S” = the solo-audio state set by UCC/CRCS Agent mutes the
endpoint’s audio. While in solo-audio state, new endpoints joining the
conference automatically mute.
“blank” = The endpoint does not detect voice energy (talking).