Lucent Technologies lucent Server User Manual


  Open as PDF
of 2392
 
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-98list configuration
8
Output
The following display shows the output from the list configuration all command.
.
board PCSS Displays all assigned ports on the circuit pack specified
by cabinet, carrier, and slot.
carrier c Displays all circuit packs and assigned ports on a
specified carrier.
control Displays all circuit packs in the control complex.
ds1 Displays all the DS1 (TN722, TN767, and TN464) port
circuit packs administered and/or physically inserted.
port-network pn# Displays all circuit packs located in a specified port
network. (List cabinet gives the port network number(s)
associated with a particular cabinet.) Circuit packs on
switch node carriers are not displayed when the
port-network qualifier is entered. To display switch node
circuit packs, use the all, carrier or board qualifiers.
stations Displays all circuit packs that can be assigned stations,
including DS1 circuit packs for remote stations.
trunks Displays all circuit packs that can be used for
administering trunks.
list configuration all Page 1
SYSTEM CONFIGURATION
Board Assigned Ports
Number Board Type Code Vintage u=unassigned t=tti
01C00 MAINTENANCE/TEST TN771C 000003 u 02 03 04
01C01 AUXILIARY TRUNK TN748C conflict u u u u
01C02 EXPANSION INTRFC no board
01C03 PGATE BOARD TN577 000003 u u u u
01C05 TONE DETECTOR TN748B 000002 01 02 03 u 05 06 07
01C06 DS1 INTERFACE TN767 000011 u u u u u u u
u u u u u u u
u u u u u u u
01C07 ANALOG LINE TN742 000010 u u u u u u u
01C08 HYBRID LINE TN762B 000004 u u u u u u u
01C09 ANALOG LINE TN742 000010 u u u u u u u
01C11 DIGITAL LINE TN754 000004 u u u u u u u
01C12 DID TRUNK TN753 000006 u u u u u u u
01C13 ANALOG LINE TN742 000010 u u u u u u u
press CANCEL to quit -- press NEXT PAGE to continue