Lucent Technologies lucent Server User Manual


  Open as PDF
of 2392
 
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-30change system-parameters maintenance
8
The following fields describe how to administer the change system-parameters
maintenance form.
change system-parameters maintenance Page 2 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
MAINTENANCE THRESHOLDS ( Before Notification )
Minimum Threshold for TTRs: 4
Minimum Threshold for CPTRs: 1
Minimum Threshold for Call Classifier Ports: _
TERMINATING TRUNK TRANSMISSION TEST (Extension)
Test Type 100: Test Type 102: Test Type 105:
ISDN MAINTENANCE
ISDN-PRI TEST CALL Extension: _____ ISDN BRI Service SPID: _____
DS1 MAINTENANCE
DSO Loop-Around Test Call Extension: _____
LOSS PLAN (Leave Blank if no Extra Loss is Required)
Minimum Number of Parties in a Conference Before Adding Extra Loss: _____
SPE OPTIONAL BOARDS
Disk? y
Packet Intf1? y Packet Intf2? n Packet Intf3? n
change system-parameters maintenance Page 3 of 3
MAINTENANCE-RELATED SYSTEM PARAMETERS
Modem Connection: external
Data Bits: 8
Parity: none
Modem Name: intel
RTS/CTS Enabled: \Q3 Auto Answer Ring Count (rings): S0=10
Asynchronous Data Mode: &M0&Q0 Dial Type: T
DTE Auto-Data Speed: \J1 Adjustable Make/Break Ratio: &P0
Disable Data Compression: H0%C0 Dial Command: D
Enable Error Control: \N3 No Answer Time-out: S7=255
Misc. Init. Param: ____________________
Help/Error Message Line
Command Line