Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-92enable administered-connection
8
1. If one processor looks as if it has been patched (updated patch identifier
and no update file) and the other looks as if the patch file is still present
(no patch identifier and valid update file), the application of the patch can
be forced by making that processor active and requesting the system
restart indicated in the accompanying documentation.
2. If one processor has a copy of the update file and the other doesn’t
(neither has been patched), the file can be copied using the copy
update-file command.
3. If patch identifiers disagree but neither side has a valid update file, the
missing patch should be redownloaded to the system. During the
download process, the file should pass the vintage test and then be
copied to the standby processor. Validation tests are then be run on both
processors. The patch is applied to memory on the next restart. This
procedure is less disruptive to the customer if the unpatched processor is
the standby at the time of the restart.
enable administered-connection
This command restarts scheduled and periodic maintenance for a single or all
administered connections and can be used to track the maintenance processing
of administered connections without interference from other maintenance
processing. This command also restarts the processing of in-line errors for all or
the selected administered connection.
enable mst
Enables the message trace that is controlled according to the parameters
created with the change mst command. If executed while the trace is enabled,
the command has no effect and returns a screen message indicating that the
command was successful.
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
enable
administered-
connection
ac number
all
The number of the administered
connection
All administered connections are
enabled.
Examples:
enable administered-connection 128
enable administered-connection all
init
inads
craft
cust
rcust
mis
none none
Action/Object Qualifier Qualifier Description Permissions Defaults
Feature
Interactions
enable mst init
inads
none none