Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-82set tone-clock
A
Enter tone/clock location:
[cabinet(1-3)];(carrier(A-E)) [’override’]
Error Messages
If an identifier greater than 3 characters is entered, or the cabinet entered is not a digit
(number), the following message will be displayed:
Identifier invalid
If the carrier entered is invalid, the following message will be displayed:
Invalid carrier specified
If the cabinet entered is not within the valid range of cabinets or the cabinet is not
administered, the following message will be displayed:
Cabinet number not assigned
If there is no tone/clock board at the specified location, one of the following messages
will be displayed:
Board not inserted
Board not assigned
If the cabinet carrier location entered is that of an EPN that is not available, the following
message will be displayed:
EPN is not available
If the board is not a TN768 tone/clock board, the following message displays:
Cannot set tdm bus or tone/clock boards;
need a TN768 board
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, the following message
displays:
All maintenance resources busy; try again later