Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-327test card-mem
8
test card-mem
This command executes a sequence of tests on the memory card in the
specified switch processor element. The test sequences in order for both long
and short options are listed in the following table:
These tests verify the sanity of the memory card device, the basic
read/erase/write operations to the memory card, the integrity of the translation
data stored in the memory card, the function of 12 volt power supply in TN777B
NETCON circuit pack used for memory card erase/write operations, the
translation capacity of the memory card, and the consistency of data stored in
both memory cards in a High or Critical Reliability system. This command can
also help troubleshoot the following hardware errors: CARD-MEM, 12V-PWR,
CAP-MEM, and FL-DATA.
1. The “Flash Data Consistency Test” is not executed in simplex systems.
Test Short Long
12 Volt Power Supply Test (#701) X X
Memory Card Insertion Test (#695) X X
Memory Card Format and Read Test (#696) X X
Memory Card Match Test (#697) X X
Memory Card Write-Protected Test (#698) X X
Memory Card Directory Recovery Test (#699) X X
Memory Card Translation Data Integrity Test (#694) X
Memory Card Erase/Write/Read Test (#693) X
Memory Card Capacity Test (#1014) X
Flash Data Consistency Test (#421) X
1