Filter
Top Products
DEFINITY Enterprise Communications Server Release 6
Maintenance for R6vs/si
555-230-127
Issue 1
August 1997
Error Messages
Page A-141test tdm
A
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later
test tdm
Help Messages
If the system technician presses HELP after entering "test tdm" the following message will
be displayed:
Enter ’port-network’, port network number (1-3),
[’long’ or ’short’], [’repeat’ (1-100) or ’clear’], [’schedule’]
Error Messages
If the technician does not enter all digits for the port-network number, the following
message will be displayed:
Entry must be all digits
If the technician enters a Port Network number that is not administered, the following
message will be displayed:
Port Network number not assigned
If the port network on which the desired TDM bus resides is unavailable, the following
message will be displayed:
EPN is not available
If the command entered is in conflict with another currently executing command, then a
message will be displayed showing the login id of the conflicting user and the conflicting
command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires the user
to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the following
message will be displayed:
All maintenance resources busy; try again later